Insights

Third party risk management: a practical guide for UK organisations

What TPRM involves, how to tier suppliers by risk, what UK regulators expect of financial services firms and public bodies, and a tiering template you can copy.

By Christopher Fagan, Managing Partner, PEF Consulting Partners

£13bnlargest programme delivered
19 yrssenior systems delivery
5 continentsdelivered across
£25msaving on a single programme

Delivered for and alongside

ShellBPCapitaBaringaOfgemSmart DCCInsightsFlui TechnologiesExxonMobilVodafoneConstellation SoftwareDeloittePwCEYNational GridElexon

Third party risk management (TPRM) is the process of identifying, assessing and controlling the risks that come from relying on outside organisations: suppliers, outsourcers, software and cloud providers, contractors, agents and their own subcontractors. It runs across the whole relationship, from due diligence before signing to monitoring during the contract and a planned exit at the end.

The logic is simple. You can outsource a service, but you cannot outsource accountability for it. When a supplier fails, is breached or behaves badly, customers and regulators hold you responsible, so the risk has to be managed as your own.

Third party risk, supplier risk and vendor risk management

The terms overlap, and the differences are mostly about scope.

  • Third party risk covers any outside organisation you rely on or act through, including partners, agents, distributors and data processors that you may not think of as suppliers.
  • Supplier risk management focuses on the organisations you buy from and usually sits with procurement. Supplier risk includes failure to deliver, financial collapse, price shocks and poor conduct in the supply chain.
  • Vendor risk management is the term most used in IT and information security, where the focus is software, cloud and data risk.

There is also fourth party risk: the suppliers your suppliers depend on. If two of your critical providers run on the same hosting platform, a single outage can take both down at once.

The risks TPRM needs to cover

A useful TPRM programme looks well beyond information security. The main risk types are:

  • Operational and resilience risk. The supplier cannot deliver, or a disruption at the supplier stops one of your important services.
  • Cyber and data risk. The supplier is breached, mishandles personal data or becomes a route into your systems.
  • Financial risk. The supplier fails or is acquired, or its prices change sharply.
  • Regulatory and legal risk. Your obligations are breached through the supplier, including data protection, sector rules, sanctions and anti bribery law.
  • Conduct, ESG and reputational risk. Modern slavery, environmental harm or poor conduct in the supply chain becomes your story.
  • Concentration and exit risk. Too much depends on one provider, or there is no practical way to leave.

Some of these risks carry direct legal exposure in the UK. Under the Bribery Act 2010 an organisation can be liable for failing to prevent bribery by people performing services on its behalf, and the Economic Crime and Corporate Transparency Act 2023 created a similar failure to prevent fraud offence for large organisations. Both make due diligence on agents and intermediaries a legal matter as well as good practice.

The UK regulatory picture

Expectations differ by sector, and some organisations face several regimes at once.

  • PRA regulated firms. The Prudential Regulation Authority’s supervisory statement SS2/21, Outsourcing and third party risk management, applies to banks, building societies, insurers and PRA designated investment firms. It covers outsourcing and other third party arrangements, including proportionate due diligence, contract terms, access and audit rights, data security, sub outsourcing, business continuity and exit plans for material arrangements.
  • FCA operational resilience rules. Firms in scope must identify their important business services, set impact tolerances for disruption, map the people, processes, technology and third parties behind each service, and test that they can stay within tolerance in severe but plausible scenarios. The transition period ended on 31 March 2025.
  • Critical third parties. A UK regime now lets HM Treasury designate providers whose failure could threaten the financial system, bringing them under direct oversight by the Bank of England, the PRA and the FCA. It does not reduce each firm’s own responsibility for managing those providers.
  • DORA. The EU Digital Operational Resilience Act has applied to EU financial entities since 17 January 2025, with detailed rules on ICT third party risk, contract terms and a register of information covering all ICT third party arrangements. UK groups with EU regulated entities need to meet it there.
  • Public bodies. The Procurement Act 2023 sets mandatory and discretionary exclusion grounds and a central debarment list, which contracting authorities must take into account before award, and it puts more weight on managing supplier performance afterwards.

Outside these regimes, UK GDPR requires a written contract with every processor that handles personal data on your behalf, and commercial organisations above the turnover threshold must publish an annual modern slavery statement that covers their supply chains. Firms in regulated markets can read more about our financial services work.

How third party risk management works, step by step

  1. Build one inventory. Combine accounts payable, contract records, the IT asset register and the record of data processing into a single list of third parties, with a named owner for each.
  2. Triage inherent risk. Ask a short set of questions about each relationship. Does it support an important service, touch personal or sensitive data, connect to your systems, carry regulatory weight or lack a ready substitute?
  3. Assign a tier. Use the answers to place each third party in a risk tier, which sets the depth of everything that follows.
  4. Carry out proportionate due diligence. Check financial health, information security, resilience, data protection, sanctions, anti bribery controls, ESG and the subcontractors the supplier relies on.
  5. Put the protections in the contract. Include audit and access rights, security and incident notification duties, approval of subcontracting, continuity testing, data return and exit assistance.
  6. Monitor during the contract. Track performance, incidents, financial signals and evidence renewals, and reassess when something material changes.
  7. Manage issues to closure. Record findings, agree remediation with dates and escalate when it slips.
  8. Plan and test the exit. For critical arrangements, keep an exit plan that covers both an orderly exit and a sudden failure, and test whether it works.
  9. Report to the board. Show risk against appetite, concentration, open issues and the state of exit plans, not just the number of questionnaires completed.

Third party risk assessment: a tiering template

A third party risk assessment should be proportionate. Tiering stops low risk suppliers drowning in questionnaires and makes sure critical ones get real scrutiny. Copy and adapt this template.

TierTypical criteria (any one applies)Due diligence before contractOngoing monitoringReassessmentExit plan
Tier 1: CriticalSupports an important business service; failure would cause serious customer or regulatory harm; no ready substituteFull assessment covering financial health, security, resilience, data protection, sanctions, ESG and subcontractors; site or virtual visit where relevantMonthly performance and risk review; incident reporting; independent assurance reports where availableAt least annually and on any material changeDocumented and tested, covering orderly exit and sudden failure
Tier 2: HighHandles sensitive or large volumes of personal data; connects to core systems; significant spend or regulatory relevanceDetailed questionnaire with supporting evidence; security review; financial checkQuarterly review; evidence renewals trackedAnnuallyDocumented
Tier 3: ModerateLimited data access; replaceable within weeks; moderate spendStandard questionnaire; sanctions and financial screeningAnnual review; alerts on financial or adverse newsEvery two yearsBasic exit steps noted
Tier 4: LowNo data or system access; readily available elsewhere; low spendBasic screening at onboardingBy exceptionOn renewalNot required

Record each tier and the reasons for it in your risk register or TPRM tool, so the decision can be explained to an auditor or regulator. For environmental and social checks, an ESG due diligence checklist gives the assessment a consistent structure.

Concentration risk and operational resilience

Concentration risk arises when too much depends on one provider, or when several providers depend on the same one underneath. It is easy to miss because each contract looks reasonable on its own. It only shows when you map your important services end to end and see the same names appear again and again.

Operational resilience turns that map into a test. For each important service, ask what happens if a given supplier is unavailable for a day, a week or for good, and whether you could stay within the level of disruption you have decided is tolerable. Where the answer is no, the options are a second supplier, a different architecture, stronger contractual commitments or an exit plan you have actually rehearsed.

Exit plans deserve more realism than they usually get. A credible plan names the alternative, estimates the time and cost to move, identifies the data and knowledge you would need and says who would run the transition.

Worked example: tiering a hypothetical supplier base

Take a hypothetical UK insurer with around four hundred suppliers. A first pass of the inventory finds about a dozen that support important business services, including the policy administration platform, a claims handling outsourcer, the cloud hosting provider and the payments processor.

Tiering places those in Tier 1 and moves several marketing and analytics agencies into Tier 2, because they hold large volumes of customer data. Most of the rest falls into Tiers 3 and 4, which cuts the questionnaire workload sharply.

The most useful finding comes from the fourth party check. The policy platform and the claims outsourcer both run on the same cloud provider in the same region, so one outage there would hit two important services at once. The response is a joint resilience test with both suppliers, a review of their failover arrangements and an exit plan that assumes the shared platform is unavailable.

Common mistakes in supplier risk management

  • Treating every supplier the same. Sending a long security questionnaire to a stationery supplier wastes everyone’s time and buries the real risks.
  • Checking once at onboarding. Risk changes during a contract. Ownership changes, breaches and financial trouble should trigger a reassessment.
  • Tiering by spend alone. A cheap supplier with access to customer data can be more dangerous than an expensive one without it.
  • Unclear ownership. Procurement, information security, risk and the business owner each assume someone else is watching. Name one accountable owner per relationship.
  • Ignoring fourth parties. Shared hosting, shared software and shared subcontractors create concentration you cannot see from your own contracts.
  • Exit plans that are never tested. A plan written for an audit and never rehearsed will not hold up when a supplier actually fails.
  • Measuring activity instead of risk. Board reports full of questionnaire counts say little about whether the organisation is safer.

How TPRM fits wider delivery work

Third party risk management works best when it is built into procurement and supplier management rather than run as a separate compliance exercise. Supply risk scores from the Kraljic matrix help set tiers, and the governance in supplier relationship management is where monitoring actually happens for key suppliers. Before an acquisition or a major platform contract, technology due diligence looks at the same dependencies from a buyer’s angle.

Our procurement consultancy builds these controls into how contracts are sourced and managed. Christopher Fagan was Project Director for the £9bn Energy Bills Support Scheme for Ofgem, BEIS and HMRC, where energy suppliers passed the support on to households, so making sure the money reached them through those third parties and was not lost along the way sat at the heart of the role. The Energy Bills Support Scheme case study covers the programme.

Common questions

What is third party risk management?

Third party risk management, or TPRM, is how an organisation identifies, assesses and controls the risks of relying on outside parties such as suppliers, outsourcers, cloud providers, contractors and agents. It covers the whole relationship: building an inventory, tiering by risk, due diligence before contract, the right contract terms, ongoing monitoring, issue management and a tested exit plan for critical arrangements.

What is the difference between third party risk management and supplier risk management?

Supplier risk management covers the organisations you buy from and usually sits with procurement. Third party risk management is wider: it also covers partners, agents, distributors, data processors and the subcontractors behind your suppliers. In practice the methods are the same, so many organisations run a single process with one inventory and one set of risk tiers.

What does PRA SS2/21 require?

SS2/21 is the Prudential Regulation Authority’s supervisory statement on outsourcing and third party risk management. It applies to banks, building societies, insurers and PRA designated investment firms, and expects proportionate due diligence, suitable contract terms including access and audit rights, data security controls, oversight of sub outsourcing, business continuity and exit plans for material outsourcing. Firms must also notify the PRA of material outsourcing arrangements.

How do you carry out a third party risk assessment?

Start with a short triage: does the third party support an important service, handle sensitive data, connect to your systems, carry regulatory weight or lack a substitute? Use the answers to assign a risk tier, then carry out due diligence in proportion, covering financial health, security, resilience, data protection, sanctions, anti bribery and ESG. Record the result, agree remediation and set a reassessment date.

What is concentration risk in third party risk management?

Concentration risk is the danger that too much depends on one provider, or that several of your providers depend on the same supplier underneath, such as a shared cloud platform. A single failure can then disrupt several important services at once. It is managed by mapping services end to end, spotting shared dependencies, adding alternatives where needed and keeping realistic, tested exit plans.

Related reading: Supplier relationship management, The Kraljic matrix explained, Risk register template and Technology due diligence.

Not sure which suppliers could really hurt you?

We can build the inventory, tier your third parties with your team and focus due diligence and exit planning where the risk actually sits.

Book a confidential conversation

Sources: Prudential Regulation Authority (2021) Supervisory Statement SS2/21: Outsourcing and third party risk management.; Financial Conduct Authority (2021) Policy Statement PS21/3: Building operational resilience.; Regulation (EU) 2022/2554 on digital operational resilience for the financial sector (DORA), 2022.; Procurement Act 2023. UK Parliament, 2023.

PEF TRACK RECORD£13bnLargestprogramme led5Continentsdelivered across19 yrsSystems delivery£25mLargestsingle saving
CF

Written by Christopher Fagan

Managing Partner, PEF Consulting Partners

Christopher has led systems and transformation delivery for 19 years, including the National Grid separation, the £9bn Energy Bills Support Scheme and the BP Pulse EV charging rollout.