Buyer’s guide
Choosing CMMS software is less about feature lists and more about whether your engineers will record their work properly. Here is what a CMMS does, where it stops, what the vendors publish on price and how I would choose.
By Christopher Fagan, Managing Partner, PEF Consulting Partners
Delivered for and alongside
















In this article
A computerised maintenance management system, or CMMS software, is built for the maintenance department. Its core records are simple: an asset register, work orders, preventive maintenance schedules, spare parts and the labour time booked against each job. Done well, it tells a maintenance manager what broke, what it cost and what is due next week.
Enterprise asset management goes further. It follows an asset from investment decision to disposal, adds condition and risk scoring, handles linear assets such as pipes and cables, and feeds capital plans and regulatory submissions. A water company planning its next price review needs that. A food factory with two hundred machines usually does not.
The practical test I use is to ask who will log in outside the maintenance team. If the answer is finance, capital planning, regulatory reporting and asset strategy, you are buying EAM, and our EAM software selection service covers that decision. If the answer is engineers, supervisors, stores and the odd requester raising a job, a CMMS is the right size and will cost a fraction of the money to run.
Every product on a shortlist will demonstrate a work order going from request to closure. The differences show up in the detail. Can a requester raise a job without a paid licence? Can a supervisor see failure codes and downtime on closure, or only a free text note? Does a reactive job link back to the asset history so recurring faults become visible?
Preventive maintenance is where tiering bites. Calendar based schedules are standard. Meter based and threshold based schedules, which matter for compressors, vehicles and anything with running hours, often sit on higher plans. On MaintainX, meter based maintenance arrives at the Premium tier; on Limble, meter and threshold scheduling is a Premium+ feature.
Parts follow the same pattern. MaintainX puts parts inventory and purchase orders on Premium. Fiix puts purchasing and requests for quotation on Professional and inventory cycle counts there too. UpKeep lists purchase order management on its Enterprise plan.
The lesson is that the entry tier price is rarely the price you will pay. Write down the ten maintenance scenarios your team handles every month, then map each one to the plan that actually supports it before comparing costs.
Most maintenance work happens in plant rooms, basements, roof spaces and remote sites where mobile signal is poor. If the app cannot hold a work order offline and sync later, engineers fall back on paper and the data never arrives. Offline working is not always in the base plan: UpKeep lists offline mode on its quoted Professional tier, and Limble lists it on Premium+.
Trial the app with your own engineers on your own sites, not in a meeting room. Ask them to scan an asset tag, attach a photo, record a reading, book time and close a job wearing gloves. Watch how many taps it takes. A system your supervisors love and your engineers avoid will give you clean dashboards built on thin data.
Single sign on is the other mobile question your IT team will raise. MaintainX, Fiix, UpKeep and eMaint all list it on their top tier, so if your security policy requires it, price that tier from the start.
Several CMMS vendors publish list prices, which is more than most enterprise software does. None of the ones I checked publish sterling figures, so treat every number below as a starting point for a pounds quote.
Check how each vendor defines a user. MaintainX counts anyone with a unique login. Ultimo lets a named user sign in from several devices, one at a time. Those definitions change the bill more than the headline rate.
The CMMS records maintenance cost; the ERP holds the money. The touch points are predictable: who raises the purchase order for parts, which system values stock, how labour hours become cost, how work orders are coded to cost centres, and how the maintenance asset register lines up with the fixed asset register finance depreciates.
On published plans, proper integration tends to sit at the top. Limble lists ERP integrations on Enterprise and marks them as possibly carrying extra cost. Fiix keeps its Integration Hub and custom API work for Enterprise. MaintainX opens its REST API from Premium. eMaint lists API integrations on Enterprise.
Decide which system is the master for each record before you choose a product. Having run the procurement of every software provider on the National Grid separation, where more than 22 million assets were in scope, my firm view is that asset record ownership has to be settled before any contract is signed, not argued about during build. Our page on ERP integration sets out how we design those interfaces.
A CMMS can be configured quickly. The effort is in the data. Asset hierarchies built up over years in spreadsheets rarely agree with what is on the floor. Preventive schedules copied from old paper systems carry tasks for equipment that was scrapped long ago. Stores catalogues hold the same bearing under four descriptions.
The common failure is loading everything as it stands and hoping to tidy it later. Nobody tidies it later. Walk the site, tag the assets that matter, rationalise the schedules and clean the parts list before go live. Our data migration consultancy covers that groundwork.
Adoption is the second effort. Supervisors need to close jobs with proper failure codes, and someone needs to read the reports in the first month and act on them, or engineers conclude nobody is looking.
PEF has a suite of consultants who have been through these choices before, during and after migration, and who have analysed why some systems are used and others quietly abandoned.
If your engineers also travel to customer sites, read our guide to field service management software, because that is a different category with different strengths. If you want an independent view, our fees are shown plainly on the pricing page.
Related reading: EAM software selection, IBM Maximo explained, Field service management software guide, ServiceMax explained, ERP pricing in the UK.
A CMMS manages day to day maintenance: work orders, preventive schedules, spare parts and labour time for the maintenance team. EAM covers the whole life of an asset, including investment planning, condition and risk, linear assets and links to capital and regulatory reporting. Most factories and facilities teams need a CMMS; utilities and large infrastructure owners usually need EAM.
Several vendors publish prices, but in US dollars. In November 2026 Fiix listed Basic at 45 and Professional at 75 US dollars per user per month, MaintainX listed Premium at 65 billed annually, and UpKeep listed Premium at 55. Features such as single sign on and ERP integration usually sit on higher, quoted tiers, so ask for a three year pounds quote.
Yes, with limits. Fiix offers a free plan with limited users and capped preventive maintenance, and MaintainX has a free Basic plan with unlimited work orders but restrictions on procedures and repeating work. Free plans are useful for testing how your engineers take to an app, but most organisations outgrow them once they need parts, purchasing or reporting.
Most CMMS products can integrate through an API, but on published plans the integration features usually sit on the top tiers and may carry extra cost. The harder work is deciding which system owns purchase orders, stock valuation, labour costing and the asset register, and agreeing that with finance before the build starts.
Configuration is usually the quick part. The time goes on cleaning the asset register, rationalising preventive schedules, sorting the spare parts list and training engineers on the mobile app. A small single site can move fast; several sites with poor asset data will take much longer. Plan the data work first and the go live date second.
Want a second opinion before you sign? Tell us what you maintain, how your engineers work today and which products you are looking at, and we will give you a straight view.
Book a confidential conversation
Independent, client side help on the systems around ERP and CRM: LIMS selection, MES selection, eQMS selection, Computer system validation, HRIS selection and implementation, Payroll implementation, Workday HCM, SAP SuccessFactors, Oracle HCM, Procurement software selection, EAM software selection, WMS selection, Power BI consultancy, and ERP implementation itself. For our fees see pricing.
Written by Christopher Fagan
Managing Partner, PEF Consulting Partners
Christopher has led systems and transformation delivery for 19 years, including the National Grid separation, the £9bn Energy Bills Support Scheme and the BP Pulse EV charging rollout.
Where next